1994 Hyundai Scoupe Timing Belt Replacement
download
Removal 1. Remove all accessory drive belts. Remove pulleys from crankshaft and water pump. CAUTION: DO NOT rotate engine counterclockwise. If reusing timing belt, place reference mark on timing belt to indicate direction of rotation before removal. 2. Remove timing belt covers and gaskets, noting bolt length and location. Rotate crankshaft clockwise to align timing marks on crankshaft and camshaft sprockets. See Fig. 1 and Fig. 2 . 3. If reusing old belt, place mark on belt to indicate direction of belt rotation.
Removal 1. Remove all accessory drive belts. Remove pulleys from crankshaft and water pump. CAUTION: DO NOT rotate engine counterclockwise. If reusing timing belt, place reference mark on timing belt to indicate direction of rotation before removal. 2. Remove timing belt covers and gaskets, noting bolt length and location. Rotate crankshaft clockwise to align timing marks on crankshaft and camshaft sprockets. See Fig. 1 and Fig. 2 . 3. If reusing old belt, place mark on belt to indicate direction of belt rotation.
Move tensioner inward toward water pump, and temporarily tighten bolt in slotted side of tensioner. Remove timing belt. Inspection Check timing belt for cracks, cracked or missing teeth, and separating canvas. Inspect timing belt tensioner
for worn bearing. Installation 1. Ensure camshaft and crankshaft
timing marks are still aligned. See Fig. 1 and Fig. 2 . Move timing belt
tensioner toward water pump and tighten bolt. 2. Install timing belt on
crankshaft and camshaft sprockets.
Make sure there is no slack in belt. If reusing old belt, ensure belt
is installed in original direction of rotation. 3. Apply
counterclockwise force on camshaft sprocket to apply tension on tension side of belt. Ensure all timing marks are aligned. See Fig. 1 and Fig. 2 . CAUTION: Slot-side
timing belt tensioner bolt must be tightened before pivot- side to
prevent belt tensioner from rotating, causing belt to be over-
tightened. 4. Loosen timing belt tensioner bolts to place tension on
timing belt. See Fig. 3 . Tighten timing belt tensioner bolts to
specification. See TORQUE SPECIFICATIONS
. 5. Smoothly rotate crankshaft clockwise for one full revolution.
Realign crankshaft and camshaft timing marks. Loosen pivot-side bolt,
and then slot-side bolt. Tighten slot-side bolt, and then pivot-side
bolt to
No comments:
Post a Comment