Auto Repairing 2005 Honda Accord Center Console Armrest Disassembly/Reassembly

Auto Repairing 2005 Honda Accord Center Console Armrest Disassembly/Reassembly

download

NOTE: When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage. Take care not to scratch armrest. 1. Remove the center console armrest. 2. Remove the screws, then remove the armrest hinge (A) and the consoletray (B) as an assembly. 3. Slide the console armrest forward fully. 4. Insert a large flat-tip screwdriver wrapped with protective tape into the center of the gap between the console armrest (A) and the console armrest base (B), and gently push it straight down until both inside hooks (C) of the console armrest come off the stop portions (D) of the console base. NOTE: Apply protective tape (E) to the projection in the back surface of the console armrest to prevent damage.

5. Slightly slide the console armrest forward to get the inside hooks over the stop portions, then remove the flat-tip screwdriver from the gap. 6. Remove the console armrest (A) from the guide rails of the console armrest base (B). 7. Remove the screws, then remove the slide bracket (A). 8. Separate the console armrest upper base (A) from the lower base (B). Remove the screws, then remove the armrest lock (C) and the tray lock (D) from the upper base. 9. Reassemble the consolearmrest in the reverse order of disassembly.