Auto Repair 2004 Ford Taurus Power Steering Pump-3.0L Removal and Installation
1. Turn the tensioners a clockwise direction and removing belt from the power steering pump pulley. 2. Loosen the fitted and remove the steering pressure hose. 3. Disconnect the the electrical connector. 4. Remove the power steering return line. 5. Using the specialized tools, remove the the power steering pump pulley. 6. Disconnect the power steering pump mounting bolts and pump. 7. To install, reverse the removal procedure. 8. NOTE: The pulley must be mounted in a 0.25 mm (0.010 inch) flush the power steering pump shaft. Using the specialized tools, install the power steering pumps pulley. 9. Using the special tool, install a new seal on the power steering pressure hose fitted. 10. The contents and leaking check the system.
No comments:
Post a Comment