2004 Hyundai Accent Timing Belt Replacement
download
TIMING BELT Removal 1. Lift vehicle using a jack. Remove engine support bracket, if necessary. Loosen, but do not remove water pump pulley bolts. Remove all accessory drive belts. Remove pulleys from crankshaft and water pump. CAUTION: DO NOT rotate engine counterclockwise. If reusing timing belt, place reference mark on timing belt to indicate direction of rotation before removal. 2. Remove timing belt covers and gaskets, noting bolt length and location. Rotate crankshaft clockwise to align timing marks on crankshaft and camshaft sprockets. See Fig. 1 . 3. If reusing old belt, place mark on belt to indicate direction of belt rotation. Loosen timing belt tensioner bolts, and move tensioner inward toward water pump.
TIMING BELT Removal 1. Lift vehicle using a jack. Remove engine support bracket, if necessary. Loosen, but do not remove water pump pulley bolts. Remove all accessory drive belts. Remove pulleys from crankshaft and water pump. CAUTION: DO NOT rotate engine counterclockwise. If reusing timing belt, place reference mark on timing belt to indicate direction of rotation before removal. 2. Remove timing belt covers and gaskets, noting bolt length and location. Rotate crankshaft clockwise to align timing marks on crankshaft and camshaft sprockets. See Fig. 1 . 3. If reusing old belt, place mark on belt to indicate direction of belt rotation. Loosen timing belt tensioner bolts, and move tensioner inward toward water pump.
Temporarily tighten bolt in slotted side of tensioner. Remove timing belt. Inspection Check timing belt for cracks, cracked or missing teeth,
and separating canvas. Inspect timing belt tensioner and idler pulley
for worn bearing. Installation 1. Ensure camshaft and crankshaft
timing marks are still aligned. See Fig. 1 . Move timing belt tensioner
toward water pump and tighten bolt. Install crankshaft sprocket (if
removed) with chamfer (flange) toward engine. 2. Install timing belt on
crankshaft sprocket, timing belt idler, camshaft sprocket and timing
belt tensioner. Make sure there is no slack in belt. If reusing old
belt, ensure belt is installed in original direction of rotation. 3.
Apply counterclockwise force on camshaft sprocket to apply tension on
tension side of belt. Ensure all timing marks are aligned. See Fig. 1 .
CAUTION: Slot-side timing belt tensioner bolt must be tightened before
pivot- side to prevent belt tensioner from rotating, causing belt to be
overtightened.
4. Loosen timing belt tensioner bolts to place tension on timing belt. See Fig. 2 . Tighten timing belt tensioner bolts to specification. See TORQUE SPECIFICATIONS
. 5. Smoothly rotate crankshaft clockwise for 2 full revolutions.
Realign crankshaft and camshaft timing marks. To check belt tension,
hold belt tensioner and timing belt together and apply slight thumb
pressure (about 11 lbs.) at center point of belt tensioner. See Fig. 2 .
6. Ensure belt cog will reach half the width of timing belt tensioner
bolt on slot-side of belt tensioner. Install crankshaft flange. Install
timing belt cover. To install remaining components, reverse removal
procedure. Adjust drive belts to proper tension.
No comments:
Post a Comment