Auto Repairing 2006–08 Honda Civic Wipers Do Not Return to the Park Position When Turned Off
The Symptom The windshield wipers do not return to the park position of when turned off. Probable reserves CAUSE The windshield wiper motor Became loose nut allowing the linkage to slip. Corrective actions Install a new windshield wiper motor with a new link, dust seals, ball joint seal, and shoulder nut; torque the new nut to a higher value than the of Original nut. PARTS INFORMATION Wiper Motor Kit: P / N 76505-SVA-A21, H / C 9186446 (Contains wiper motor, links, dust seals, ball joint seal, and shoulder nut.) REPAIR PROCEDURE 1. Open the hood. Remove the the caps, the nuts, and the windshield wiper arms. CAPs
2. Remove the cowl covers. 3. Remove the nine bolts and the under-cowl panel. BOLTS BOLTS 4. Disconnect the 5P connector from the wiper motor, then remove the six bolts and the wiper linkage assembly. 5. Remove the wiper motor nut, then remove the link with the joint ball seal, the dust seal, and the wiper motor. None of these removed parts will be reused. 6. Before youinstall the new wiper motor, set it to its park position: • Connect the 5P connector to the motor. • Turn the ignition switch to ON (II). • Turn the wiper switch on and then off. • Turn the ignition switch to LOCK (0). • Disconnect the 5P connector from the motor. 7. Install the new wiper motor to the linkage with the new dust seal. Install the new joint ball seal on the link.
No comments:
Post a Comment