2006 Nissan Murano Display screen, heater, air conditioner and audio systems
download
“Reset” key using the joystick and push the “ENTER” button. To display the MAINTENANCE NOTICE, auto- matically when setting trip distance is reached, select the “Display Maintenance Notification” key and push the “ENTER” button. MAINTENANCE NOTICE The “MAINTENANCE NOTICE” screen (“EN- GINE OIL” or “TIRE ROTATION”) will be auto- matically displayed as shown when both of the following conditions are met: ¼ the vehicle is driven the set distance and the ignition switch is turned OFF. ¼ the ignition key is turned ON the next time the vehicle will be driven. To return to the previous display after the “MAINTENANCE NOTICE” screen is displayed, push the “PREV” button. The “MAINTENANCE NOTICE” screen displays each time the key is turned ON until one of the following conditions are met: ¼ “RESET” is selected. ¼ “Display Maintenance Notification” is set OFF. ¼ the maintenance interval is set again.
“Reset” key using the joystick and push the “ENTER” button. To display the MAINTENANCE NOTICE, auto- matically when setting trip distance is reached, select the “Display Maintenance Notification” key and push the “ENTER” button. MAINTENANCE NOTICE The “MAINTENANCE NOTICE” screen (“EN- GINE OIL” or “TIRE ROTATION”) will be auto- matically displayed as shown when both of the following conditions are met: ¼ the vehicle is driven the set distance and the ignition switch is turned OFF. ¼ the ignition key is turned ON the next time the vehicle will be driven. To return to the previous display after the “MAINTENANCE NOTICE” screen is displayed, push the “PREV” button. The “MAINTENANCE NOTICE” screen displays each time the key is turned ON until one of the following conditions are met: ¼ “RESET” is selected. ¼ “Display Maintenance Notification” is set OFF. ¼ the maintenance interval is set again.
Tire pressure information (if so equipped) Pressure indication in ** psi on the screen indicates that the pressure is being measured. After a few driving trips,
the pressure for each tire will be displayed randomly. The order of
tire pressure figures displayed on the screen does not correspond with
the actual order of the tire position. Tire pressure rises and falls
depending on the heat caused by the vehicle’s traveling condition and
the temperature. In case of low tire
pressure, a message (FLAT 4-6 Display screen, heater, air conditioner
and audio systems SAA1356 “Display” settings The DISPLAY SETTINGS
screen will appear when selecting the “Display” key and pushing the
“ENTER” button. Brightness/Contrast/Screen Background: To adjust the
brightness and contrast of the screen, select the
“Brightness/Contrast/Screen Background” key and push the “ENTER” button.
Then you can adjust the brightness to Darker or Brighter, the contrast
to Lower or Higher using the joystick.
No comments:
Post a Comment