2002-2004 Nissan Altima Manual Hvac Temperature Control Inoperative
download
If you confirm the manual a/c system temperature control will not operate. Actions remove and inspect the a/c control. • if the temperature control cable and/or the a/c control attachment point for the cable are damaged, replace both. If the above are not damaged, and only the temperature control lever is damaged, replace only the temperature control lever. • service procedure temperature control cable and a/c control inspection 1. Remove the a/c control per the 2002 altima esm, section mtc. 2. Inspect the temperature control cable. If there is any damage such as kinks, stress areas, etc. Go to temperature control cable and a/c control replacement. 3. Inspect the a/c control. If there is any damage to cable attaching retainer, go to temperature control cable and a/c control replacement. Note: if there is no damage to either the cable or a/c control, and only the temperature control lever is damaged, go to temperature control lever replacement. Temperature control lever replacement 1. Move the temperature control knob to the center position.
If you confirm the manual a/c system temperature control will not operate. Actions remove and inspect the a/c control. • if the temperature control cable and/or the a/c control attachment point for the cable are damaged, replace both. If the above are not damaged, and only the temperature control lever is damaged, replace only the temperature control lever. • service procedure temperature control cable and a/c control inspection 1. Remove the a/c control per the 2002 altima esm, section mtc. 2. Inspect the temperature control cable. If there is any damage such as kinks, stress areas, etc. Go to temperature control cable and a/c control replacement. 3. Inspect the a/c control. If there is any damage to cable attaching retainer, go to temperature control cable and a/c control replacement. Note: if there is no damage to either the cable or a/c control, and only the temperature control lever is damaged, go to temperature control lever replacement. Temperature control lever replacement 1. Move the temperature control knob to the center position.
2. Remove the damaged temperature lever (be careful not to damage the cable). Insert a flat head
screw driver in the position shown to carefully pry off the lever. 3.
Note the position of the “key” on the gear and temperature lever. 4.
Attach the cable to the new temperature control lever. 5. Install the
temperature control lever to the a/c control. Be sure to match the “key”
positions (see figure 5). 6. Confirm installation by turning the
temperature control knob. The knob should be easy to turn. 7. Install
the a/c control per the esm, section mtc. Temperature control cable and
a/c control replacement 1. Attach the new temperature control cable
and new a/c control. Note: the cable may only be installed to the a/c
control one (1) time. Removing the cable from the a/c control will
damage the cable and the a/c control feature. 2. Install the a/c
control per the esm, section mtc.
No comments:
Post a Comment