1993 Toyota Mr2 Mudguard Installation Instructions
download
A mudguard kit is available for installation on the ‘93 MR2. Be sure to thoroughly clean all attach- ment areas and carefully follow the installation procedures below: INSTALLATION PROCEDURE: Front of Vehicle 1. Remove (2) mounting screws and fender liner molding behind front tire (See Figure 1). Figure 1 2. Remove (1) mounting bolt located in bottom of fender well behind front tire (See Figure 2). Figure 2 3. Align front mudguard and reinstall (2) previously removed mounting screws to front of mudguard surface (See Figure 3).
A mudguard kit is available for installation on the ‘93 MR2. Be sure to thoroughly clean all attach- ment areas and carefully follow the installation procedures below: INSTALLATION PROCEDURE: Front of Vehicle 1. Remove (2) mounting screws and fender liner molding behind front tire (See Figure 1). Figure 1 2. Remove (1) mounting bolt located in bottom of fender well behind front tire (See Figure 2). Figure 2 3. Align front mudguard and reinstall (2) previously removed mounting screws to front of mudguard surface (See Figure 3).
4. Reinstall (1) previously removed mounting bolt to bottom of mudguard surface (see Figure 4). Rear of Vehicle:
1. Remove (1) mounting screw from fender liner molding behind rear
tire (see Figure 5). 2. Remove (1) plastic reinforcement located
inboard of fender liner molding behind rear tire (see Figure 6). 3.
Remove (1) mounting bolt located inboard at bottom of rear fender well
and install metal mounting bracket (see Figure 7 and 8).
No comments:
Post a Comment