Repairing Manual 2006–2010 Toyota RAV4 Sunvisor Mount Loose
Introduction Under certain operating conditions, the mounting area of the driver and/or front passenger sunvisor on the vehicle body may become damaged. If this has occurred, the sunvisor may become loose from the mounting area located on the headliner. To address this condition, newly designed mounting brackets have been made available to reinstall the sunvisors. Follow the procedures in this bulletin to install the mounting brackets Repair Procedure 1. Remove the affected sunvisor assembly. Refer to the Technical Information System (TIS), applicable model year RAV4 Repair Manual: 2006 (to 01/2006) / 2006 (from 01/2006) / 2007 / 2008 / 2009 / 2010 RAV4: Vehicle Interior – Interior Panels/Trim – “Interior: Roof Headlining: Removal” 2. Straighten the roof sheet metal where the visor clips contact the roof. Figure 1. . 3. Apply felt to the roof panel opening for visor as shown. Cut two strips from the felt sheet to the following dimensions: Length: 25 mm (1 in.) Width: 9 mm (3/8 in.) Thickness: 0.5 mm (0.02 in.
No comments:
Post a Comment