Ford Crown Victoria And Grand Marquis, Body Side Molding Installation
download
Refer to Section 501-08 of the Workshop Manual (WSM) when installing body side molding on Crown Victoria and Grand Marquis vehicles. To ensure proper bond between the molding and the vehicle, the vehicle surface must be clean and warm (above 70 degrees F) and the molding must be thoroughly heated as per the WSM procedure. For police vehicles that were shipped with body side molding uninstalled, please ensure that all installers are provided a copy of the proper installation procedure.
download
Refer to Section 501-08 of the Workshop Manual (WSM) when installing body side molding on Crown Victoria and Grand Marquis vehicles. To ensure proper bond between the molding and the vehicle, the vehicle surface must be clean and warm (above 70 degrees F) and the molding must be thoroughly heated as per the WSM procedure. For police vehicles that were shipped with body side molding uninstalled, please ensure that all installers are provided a copy of the proper installation procedure.
No comments:
Post a Comment