Auto Repairing 2004 Honda Accord Taillight Replacement
Taillight (4th-the door) 1. Remove the Reviews the rear bumper. the second. Open Reviews the trunk lid and remove Reviews the trunk side a trim panels. 3. Disconnect theconnectors (A) from the taillights (B). Brake / taillight ('03-05 models): 21/5 W Brake / taillight ('06-07 models): LED 4. Remove Reviews the of mounting nuts and screws, then remove Reviews the taillight. '03-05 models '06-07 models 5. Turn the turn signal light bulbsocket 45 º counterclockwise to remove Reviews the bulb. Turn Signal Light: 21 W 6. Inspect the gasket; replace it if it is distorted or stays compressed. Inner taillight (4-door) ('03-05 models) 1. Open Reviews the trunk lid and disconnect Reviews the connectors (A) from the trunk lid. Taillight: Back-up Light: 21 W the second. Remove the three nuts and the inner taillight (B).
3. Turn the bulb socket 45 º counterclockwise to remove the bulb. 4. Inspect the gasket; replace it. If it is distorted or stays compressed. 5. Install the taillight and tighten the nuts to 5 N•m (0.5 kgf•m, 4 lbf•ft). 6. After installing the taillight, run water over it to make sure it does not leak. 5W 7. Install the taillight in the reverse order of removal and tighten the nuts to 5 N•m (0.5 kgf•m, 4 lbf•ft). 8. After installing the taillight, run water over it to make sure it does not leak.
No comments:
Post a Comment