Auto Repairing 2001 Honda Odyssey Timing Belt Removal
Special Tools Required Holder Handle 07JAB-001020A Holder Attachment, 50 mm, Offset 07MAB-PY3010A Socket, 19 mm 07JAA-001020A or a commercially available 19 mm socket 1. Turn the crankshaft so its white mark (A) lines up with the pointer (B). 2. Check that the No.1 piston Top Dead Center (TDC) mark (A) on the front camshaft pulley and the pointer (B) on the front upper cover are aligned. 3. Remove the front tires/wheels. 4. Remove the splash shield. 5. Remove the alternator-compressor belt. 6. Loosen the adjusting nut (A), locknut (B) and mounting bolt (C), then remove the Power Steering (P/S) pump belt (D). 7. Support the engine with a jack and wood block under the oil pan. 8. Remove the side engine mount bracket.
No comments:
Post a Comment