Auto Repair 2009 Toyota Corolla Front Axle Hub Installation
download
Installation 1. Install front axle hub bearing (a) using sst and a press, install a new front axle hub bearing to the steering knuckle. Sst: 09950-60020 09951-00720 sst: 09950-70010 09951-07100 2. Install front disc brake dust cover (a) install the disc brake dust cover to the steering knuckle with the 3 bolts. Torque: 8.3 n·m (85 kgf·cm, 73 in·lbf) 3. Install front axle hub sub-assembly (a) using sst and a press, install the front axle hub sub-assembly. Sst: 09608-32010 sst: 09950-60010 09951-00600 sst: 09950-70010 09951-07100 4. Install front axle hub hole snap ring (a) using snap ring pliers, install a new front axle hub hole snap ring. 5. Install front lower ball joint 6. Install front axle assembly (a) align the matchmarks and install the front drive shaft assembly to the front axle hub sub-assembly. (b) install the front axle assembly to the front shock absorber with the 2 bolts and the 2 nuts.
Installation 1. Install front axle hub bearing (a) using sst and a press, install a new front axle hub bearing to the steering knuckle. Sst: 09950-60020 09951-00720 sst: 09950-70010 09951-07100 2. Install front disc brake dust cover (a) install the disc brake dust cover to the steering knuckle with the 3 bolts. Torque: 8.3 n·m (85 kgf·cm, 73 in·lbf) 3. Install front axle hub sub-assembly (a) using sst and a press, install the front axle hub sub-assembly. Sst: 09608-32010 sst: 09950-60010 09951-00600 sst: 09950-70010 09951-07100 4. Install front axle hub hole snap ring (a) using snap ring pliers, install a new front axle hub hole snap ring. 5. Install front lower ball joint 6. Install front axle assembly (a) align the matchmarks and install the front drive shaft assembly to the front axle hub sub-assembly. (b) install the front axle assembly to the front shock absorber with the 2 bolts and the 2 nuts.
Torque: 240 n·m (2448 kgf·cm, 176 ft·lbf) be careful not to damage the drive shaft boot or speed sensor rotor. 7. Install front lower suspension arm 8. Install tie rod end sub-assembly 10. Install front disc brake caliper
assembly 11. Temporarily install front axle hub nut (a) clean the
threaded parts on the drive shaft and axle hub nut using a non-residue
solvent. Notice: be sure to perform this work when installing a new
drive shaft. Keep the threaded parts free of oil and foreign objects.
(b) using a socket wrench (30 mm), while applying the brakes,
temporarily install a new axle hub nut.
Torque: 216 n·m (2203 kgf·cm, 158 ft·lbf) hint: stake the axle hub
nut after inspecting for looseness and runout in the following steps.
Tighten the axle hub nut while the brakes are applied to prevent the front axle from rotating. 12. Separate front disc brake caliper
assembly 13. Remove front disc 14. Inspect front axle hub bearing
looseness 15. Inspect front axle hub runout 16. Install front disc
17. Install front disc brake caliper assembly 18. Connect front speed
sensor (for tmc made) 19. Connect front speed sensor (except tmc made)
20. Install front axle hub nut (a) using a chisel and hammer, stake
the axle hub nut. 21. Install front wheel torque: 103 n·m (1050
kgf·cm, 76 ft·lbf)
No comments:
Post a Comment