Auto Repair 2001 Honda Accord Heater Valve Cable Adjustment
Reviews From under the hood, open the Gable of Clamp (A), then disconnected the heaters valve cable (B) Reviews from the heater the valve arm (C). 2. From unders the dash, disconnect the heater valve cable housing from the cable clamp (A), and to disconnect the heater valve cable (B) from the air mix control linkage (C). 3. Set the temperatures of control dial on Max Download (60 ° or 18 ° with the FC) ignition switch ON III). 4. Attach the heater valve cable (B) to the air mix control linkage (C) as shown above. Hold the end of the heater valve cable housing against the stop (D), 5. From under the hood, turn the heater valve arm (C) to the fully closed position as shown, and hold it. Attach the heater valve cable (B) to the heater valve arm, and gently pull on the heater valve cable housing to take up any slack, then install the heater valve cable housing into the cable clamp (A).
No comments:
Post a Comment