2009 Cadillac CTS Front Wheel Speed Sensor Replacement (AWD) Removal Procedure
download
Warning: Refer to Brake Dust Warning (See: Service Precautions\Technician Safety Information\Brake Dust Warning). 1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance\Vehicle Lifting\Service and Repair). 2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance\Wheels and Tires\Service and Repair). 3. Disconnect the wheel speed sensor electrical connector (1). 4. Remove the wheel speed sensor wire harness clips (2) from the stabilizer bar bracket. 5. Remove the wheel speed sensor wire harness clip (1) from the steering knuckle. 6. Thoroughly clean the wheel speed sensor mounting area of the steering knuckle of any dirt and debris. 7. Remove the wheel speed sensor bolt (1). 8. Remove the wheel speed sensor (1) from the steering knuckle. Installation Procedure 1. Install the wheel speed sensor (1) to the steering knuckle. Caution: Refer to Fastener Caution (See: Service Precautions\Vehicle Damage Warnings\Fastener Caution). 2. Install the wheel speed sensor bolt (1) and tighten to 9 Nm (80 lb in) .
Warning: Refer to Brake Dust Warning (See: Service Precautions\Technician Safety Information\Brake Dust Warning). 1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance\Vehicle Lifting\Service and Repair). 2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance\Wheels and Tires\Service and Repair). 3. Disconnect the wheel speed sensor electrical connector (1). 4. Remove the wheel speed sensor wire harness clips (2) from the stabilizer bar bracket. 5. Remove the wheel speed sensor wire harness clip (1) from the steering knuckle. 6. Thoroughly clean the wheel speed sensor mounting area of the steering knuckle of any dirt and debris. 7. Remove the wheel speed sensor bolt (1). 8. Remove the wheel speed sensor (1) from the steering knuckle. Installation Procedure 1. Install the wheel speed sensor (1) to the steering knuckle. Caution: Refer to Fastener Caution (See: Service Precautions\Vehicle Damage Warnings\Fastener Caution). 2. Install the wheel speed sensor bolt (1) and tighten to 9 Nm (80 lb in) .
No comments:
Post a Comment