2007 Chevrolet Colorado Digital Radio Receiver Replacement
download
Removal Procedure IMPORTANT: Do NOT swap digital radio receivers between vehicles. Swapping digital receivers between vehicles will activate the digital radio Theftlock®, and “XM Theftlock®” will display. 1. Remove the instrument panel (I/P) compartment door. Refer to Instrument Panel Compartment Door Replacement . 2. Unfold the service panel located above the I/P compartment door. 3. Remove the I/P access cover. 4. Remove the screws retaining the digital radio receiver to the I/P structure. 5. Lower the receiver from the I/P. IMPORTANT: Do not attempt to pry or slide the electrical connector release lever (1). 6. Disconnect the electrical connector by pushing on the release lever (1).
Removal Procedure IMPORTANT: Do NOT swap digital radio receivers between vehicles. Swapping digital receivers between vehicles will activate the digital radio Theftlock®, and “XM Theftlock®” will display. 1. Remove the instrument panel (I/P) compartment door. Refer to Instrument Panel Compartment Door Replacement . 2. Unfold the service panel located above the I/P compartment door. 3. Remove the I/P access cover. 4. Remove the screws retaining the digital radio receiver to the I/P structure. 5. Lower the receiver from the I/P. IMPORTANT: Do not attempt to pry or slide the electrical connector release lever (1). 6. Disconnect the electrical connector by pushing on the release lever (1).
7. Remove the connector position assurance (CPA) (2) from the electrical connector.
8. Remove the connector from the receiver. 9. Remove the receiver from
the vehicle. 10. If replacing the receiver, remove the nuts retaining
the receiver to the mounting bracket. 11. Remove the receiver from the
mounting bracket. Installation Procedure NOTE: 1. If replacing the
receiver, install the receiver to the mounting bracket and install the
retaining nuts. Tighten: Tighten the nuts to 3 N.m (26 lb in). Refer
to Fastener Notice .
No comments:
Post a Comment