2005 BMW 325xi Exhaust System Removal Installation
download
Support exhaust system with jack and Special Tool (31 2 220) and secure against falling out. See Fig. 1 . Remove nuts (1) and remove connecting plate (2). See Fig. 2 . Remove screw (1) and remove exhaust bracket. See Fig. 3 . On sedan and coupe, remove screws (1) and remove reinforcement plate (2). See Fig. 4 . Remove screws (3). Reinforcement plate (4) is connected to exhaust system via rubber mounts and does not have to be removed. 5. On convertible, remove screws and remove body reinforcement strut (1). See Fig. 5 . Remove screws. See Fig. 6 . Reinforcement plate (1) is connected to exhaust system via rubber mounts and does not have to be removed.
Support exhaust system with jack and Special Tool (31 2 220) and secure against falling out. See Fig. 1 . Remove nuts (1) and remove connecting plate (2). See Fig. 2 . Remove screw (1) and remove exhaust bracket. See Fig. 3 . On sedan and coupe, remove screws (1) and remove reinforcement plate (2). See Fig. 4 . Remove screws (3). Reinforcement plate (4) is connected to exhaust system via rubber mounts and does not have to be removed. 5. On convertible, remove screws and remove body reinforcement strut (1). See Fig. 5 . Remove screws. See Fig. 6 . Reinforcement plate (1) is connected to exhaust system via rubber mounts and does not have to be removed.
6. On all vehicles, if fitted, detach vacuum hose (1) from vacuum unit (2). See Fig. 7 . 7. Remove nuts on rubber mount of rear muffler on left and right. See Fig. 8 . Lower exhaust system with lifter and remove. 1. 2. 3. 4.Installation 1. 2. 3. 4. To install, reverse removal procedure. Check seals (1). See Fig. 9 . Replace, if necessary. Replace self-locking nuts
(1). See Fig. 2 . Coat threads with copper paste. Slacken screws (2).
See Fig. 3 . Align exhaust carrier so that it is free from tension.
No comments:
Post a Comment