2001 BMW X5 Removing and Installing/Replacing Outside Handle and Lock Actuator
download
Front Door Exterior Handle: Service and Repair Removing and Installing/Replacing Outside Handle and Lock Actuator From Left or Right Front Door 51 21 200 Removing And Installing/Replacing Outside Handle And Lock Actuator From Left Or Right Front Door Remove sound insulation on front door. Remove outside handle on front door. Remove seals (1) and (2) for outside handle. Unclip ball head (1). Detach Bowden cable (2) from support (3) on door lock. Loosen bolt (1). Lift out lock actuator (2) towards front and remove to inner door panel. Installation: Guide (3) must be located outside metal edge (4). Lock actuator (5) must be flush with guide (6).
Front Door Exterior Handle: Service and Repair Removing and Installing/Replacing Outside Handle and Lock Actuator From Left or Right Front Door 51 21 200 Removing And Installing/Replacing Outside Handle And Lock Actuator From Left Or Right Front Door Remove sound insulation on front door. Remove outside handle on front door. Remove seals (1) and (2) for outside handle. Unclip ball head (1). Detach Bowden cable (2) from support (3) on door lock. Loosen bolt (1). Lift out lock actuator (2) towards front and remove to inner door panel. Installation: Guide (3) must be located outside metal edge (4). Lock actuator (5) must be flush with guide (6).
CAUTION: – Bowden cable
(1) must not be removed or replaced. – In event of a mix-up, the door
will not be able to be opened. – Lock actuator (2) has a red marking on
Bowden cable (1). Installation: Bowden cable (1) must be fitted
correctly with lock actuator (2). Seal (3) must be fitted – wind noises.
Buffers (4) must be fitted. If necessary, replace screw (1) on lock
actuator (2). Guide (3) must be flush with support (4).
No comments:
Post a Comment