2000 BMW Z3 Roadster Removing/Installing Radiator
download
Caution: Danger of scalding Only open sealing cover on expansion tank when engine has cooled down. Drain coolant, refer to Cooling System – Service and Repair – Procedures See: Service and Repair Remove fan cowl, refer to Fan Shroud – Service and Repair – Procedures See: Fan Shroud/Service and Repair Note: When removing the fan cowl, note the engine variant. Air conditioner Disconnect plug connection on temperature switch. Disconnect upper water hose. Disconnect lower water hose. Disconnect expansion hose.
Caution: Danger of scalding Only open sealing cover on expansion tank when engine has cooled down. Drain coolant, refer to Cooling System – Service and Repair – Procedures See: Service and Repair Remove fan cowl, refer to Fan Shroud – Service and Repair – Procedures See: Fan Shroud/Service and Repair Note: When removing the fan cowl, note the engine variant. Air conditioner Disconnect plug connection on temperature switch. Disconnect upper water hose. Disconnect lower water hose. Disconnect expansion hose.
Automatic transmission Remove transmission oil cooler
lines, catch transmission oil as it escapes and dispose of correctly.
Installation: Check transmission oil level and correct if necessary,
refer to Transmission and Drivetrain. Check connection for leaks.
Unfasten left and right radiator mounts by pressing detent down with
screwdriver. Sectional view of radiator mount: 1. Screwdriver 2. Front
trim 3. Retaining lug for radiator Installation: Attach retaining lugs
in left and right sides of radiator and press down firmly. The detent
must engage audibly several times. Installation: Use screwdriver to
locate and lug of radiator mount and to tighten the unit. Lift radiator
upwards (together with intercooler if applicable). Installation: Place
radiator on supports. Installation: Note rubber mounts on left and
right sides.
No comments:
Post a Comment