1998 Mazda MPV Radio, Stereo, and Compact Disc Service and Repair
download
REMOVAL 1. Disconnect the negative battery cable. 2. Remove the hole covers by inserting a small, tape-wrapped, flathead screwdriver into the slot and carefully prying them off without scratching the center lower panel. Pry up and pull off the hole covers carefully to prevent the posts from breaking off. 3. With the beveled parts of the SST facing inward, insert them into the audio unit. 4. Pull the SST as shown to slide out the audio unit. 5. Disconnect the audio unit connector and antenna jack to remove the audio INSTALLATION CAUTION: Make certain that the wiring harness and antenna feeder are not caught between the audio unit and center lower panel. If the harness or antenna feeder is caught between the audio unit and center lower panel, it may become the cause of trouble or malfunctions. 1. 2. 3. 4. Connect the audio unit connector and antenna jack. Insert the audio unit until each clip clicks. Insert the hole covers. Connect the negative battery cable.
REMOVAL 1. Disconnect the negative battery cable. 2. Remove the hole covers by inserting a small, tape-wrapped, flathead screwdriver into the slot and carefully prying them off without scratching the center lower panel. Pry up and pull off the hole covers carefully to prevent the posts from breaking off. 3. With the beveled parts of the SST facing inward, insert them into the audio unit. 4. Pull the SST as shown to slide out the audio unit. 5. Disconnect the audio unit connector and antenna jack to remove the audio INSTALLATION CAUTION: Make certain that the wiring harness and antenna feeder are not caught between the audio unit and center lower panel. If the harness or antenna feeder is caught between the audio unit and center lower panel, it may become the cause of trouble or malfunctions. 1. 2. 3. 4. Connect the audio unit connector and antenna jack. Insert the audio unit until each clip clicks. Insert the hole covers. Connect the negative battery cable.
No comments:
Post a Comment