1994 Mazda Protege Axle Shaft: Service and Repair Removal
download
Remove wheel and tire (1). Remove splash shield (2). Remove axle shaft locknut (3). Remove stabilizer link (4). 5. Loosen tie-rod end lock nut (5) and remove using SST 49 0118 850C or equivalent. 6. Remove lower ball joint (6). 7. Remove the driveshaft (7, 8) from the transaxle with a pry bar. Caution: Do not damage the dust cover or oil seal. 8. If the driveshaft is stuck in the wheel hub, install a nut flush with the end of the axle shaft. Tap with a copper or brass hammer until the drive shaft pops clear.
Remove wheel and tire (1). Remove splash shield (2). Remove axle shaft locknut (3). Remove stabilizer link (4). 5. Loosen tie-rod end lock nut (5) and remove using SST 49 0118 850C or equivalent. 6. Remove lower ball joint (6). 7. Remove the driveshaft (7, 8) from the transaxle with a pry bar. Caution: Do not damage the dust cover or oil seal. 8. If the driveshaft is stuck in the wheel hub, install a nut flush with the end of the axle shaft. Tap with a copper or brass hammer until the drive shaft pops clear.
No comments:
Post a Comment