download
See Figure 1 1. Remove the door trim panel and water deflector. 2. Remove the window, as outlined earlier in this section. 3. Lower the window regulator about 3 / then remove the bolts. 4. Detach the window regulator motor electrical connector. 5. Remove the window regulator from the door by rotating the assembly counterclockwise, then tilt the upper rear surface out from the door, rotate clockwise and lift the regulator assembly out. of the way down. Matchmark the location of the upper regulator mounting bolts, 4 Fig. Fig. 1: Window regulator and motor mounting-1996 shown, others similar To install: 6. Position the regulator assembly in the door. 7. Start threading the upper and lower regulator mounting bolts, align the upper bolts with the matchmark made during removal, then tighten the bolts to 84 inch lbs. (9.5 Nm). 8. Attach the regulator motor electrical connector. 9. Install the window, as outlined earlier in this section. 10. Instlal the water deflector and door trim panel.
See Figure 1 1. Remove the door trim panel and water deflector. 2. Remove the window, as outlined earlier in this section. 3. Lower the window regulator about 3 / then remove the bolts. 4. Detach the window regulator motor electrical connector. 5. Remove the window regulator from the door by rotating the assembly counterclockwise, then tilt the upper rear surface out from the door, rotate clockwise and lift the regulator assembly out. of the way down. Matchmark the location of the upper regulator mounting bolts, 4 Fig. Fig. 1: Window regulator and motor mounting-1996 shown, others similar To install: 6. Position the regulator assembly in the door. 7. Start threading the upper and lower regulator mounting bolts, align the upper bolts with the matchmark made during removal, then tighten the bolts to 84 inch lbs. (9.5 Nm). 8. Attach the regulator motor electrical connector. 9. Install the window, as outlined earlier in this section. 10. Instlal the water deflector and door trim panel.
No comments:
Post a Comment