1993 Toyota Camry Timing Belt Installation

 1993 Toyota Camry Timing Belt Installation

download
1. INSTALL OIL PUMP PULLEY a. Align the cutouts of the pulley and shaft, and slide on the pulley. b. Using SST, install the nut. SST: 09616-30011 Torque: 26 N.m (290 kgf.cm, 21 ft.lbf) 2. INSTALL CRANKSHAFT TIMING PULLEY a. Align the timing pulley set key with the key groove of the pulley. b. Slide on the timing pulley, facing the flange side inward. 3. INSTALL NO.2 IDLER PULLEY a. Install the pulley with the bolt. Torque: 42 N.m (425 kgf.cm, 31 ft.lbf) HINT: Use bolt 35 mm (1.38 in.) in length. b. Check that the idler pulley moves smoothly. 4. TEMPORARILY INSTALL NO.1 IDLER PULLEY AND TENSION SPRING a. Install the pulley with the bolt. Do not tighten the bolt yet. HINT: Use bolt 42 mm (1.65 in.) in length.

b. Install the tension spring. c. Pry the pulley toward the left as far as it will go and tighten the bolt. d. Check that the idler pulley moves smoothly. 5. TEMPORARILY INSTALL TIMING BELT NOTICE: The engine should be cold. b. Remove any oil or water on the crankshaft pulley. oil pump pulley, water pump pulley, No.1 idler pulley, No. 2 idler pulley and keep them clean. c. Install the timing belt on the crankshaft timing pulley, oil pump pulley, No.1 idler pulley. water pump pulley and No.2 idler pulley. HINT: (When re-using timing belt): Align the points marked during removal. and install the belt with the arrow pointing in the direction of engine revolution.